Guides / Tier II Reporting in Oklahoma

Tier II Chemical Reporting in Oklahoma: Who Files & How

⏰ OSHA HazCom deadline — November 20, 2026: employers must update their workplace labels, written HazCom program, and employee training to the new GHS format by then. Check your program free — 2-minute self-audit →
Updated September 2026

Short answer: if your Oklahoma facility stores a hazardous chemical at or above its EPCRA reporting threshold — generally 10,000 pounds, or as low as 500 pounds for an Extremely Hazardous Substance — you must file an annual Tier II chemical-inventory report by March 1, covering the prior calendar year. It goes to your State Emergency Response Commission (SERC), your Local Emergency Planning Committee (LEPC), and your local fire department. In Oklahoma you prepare the report in EPA's Tier2 Submit and file it electronically with the Department of Environmental Quality (DEQ), which forwards it to LEPCs and fire departments. The hardest part is compiling an accurate inventory with quantities — which is exactly what SDSentry ($24 per location per month) keeps current for you year-round. Here is how Tier II works in Oklahoma.

Free, no signup: the SDS binder builder at sdsentry.0xpi.com/sds-binder.html turns a pasted list of the products you keep on site into one printable index of their current safety data sheets.

Could you produce the sheet for every product on your shelf? Paste your product list and get each manufacturer’s current safety data sheet as one printable binder index — free, no signup. Build my SDS binder — free →

What Tier II is (and isn't)

Tier II is the annual chemical-inventory report required under Section 312 of the Emergency Planning and Community Right-to-Know Act (EPCRA). Its purpose is to tell fire departments and emergency planners what hazardous chemicals are stored at your facility, in what quantities, and where, so responders know what they are walking into. It is a separate obligation from OSHA Hazard Communication — the same chemicals on your shelves, but a different law and a different audience. Meeting your HazCom duties does not satisfy Tier II, and vice versa.

Who has to file in Oklahoma

The trigger is federal and applies the same way in Oklahoma as everywhere else. You must file Tier II if any hazardous chemical for which you are required to keep a safety data sheet is present at your facility at or above its reporting threshold at any point during the year:

Quantities are based on the maximum amount present at any one time, aggregated across the facility. A small clinic or shelter often stays under these limits, but bulk propane or diesel tanks, stored fuel, pool and spa chemicals, fertilizer, or a large supply of a single disinfectant can push you over — and EHS thresholds are low enough that a modest amount of the wrong chemical can trigger a report.

Where Oklahoma facilities submit

EPCRA sends every Tier II report to three places: your State Emergency Response Commission (SERC), your Local Emergency Planning Committee (LEPC), and your local fire department.

Oklahoma's SERC is the Oklahoma Hazardous Materials Emergency Response Commission (OHMERC), and “the DEQ acts as the state's central repository for Tier II information.” DEQ's rules are specific: “Tier II reports must be submitted electronically to DEQ via the DEQ Online Filing System,” and “Tier II reports must be prepared using the latest version of EPA software Tier2Submit.”

Oklahoma is one of the states where one filing covers everyone: reports are “submitted annually to DEQ only; DEQ distributes to Local Emergency Planning Committees (LEPC) and fire departments.” Start from DEQ's Tier II reporting page.

State systems and instructions can change year to year, so confirm current details with the Oklahoma DEQ before you file.

The deadline

DEQ: facilities “must provide an annual inventory report to the Oklahoma Department of Environmental Quality in the form of a Tier II Report due by March 1 of each year.” Install the latest Tier2 Submit version before you start, since DEQ requires it.

Are there Oklahoma state fees?

Yes. DEQ's fee schedule (OAC 252:20-1-7):

Paying online adds charges: a 2.25% merchant fee plus a $2.00 portal fee per transaction by credit or debit card, or a $1.00 portal fee per ACH transaction.

What to have ready before you file

The report itself is mostly a structured list. What slows people down is assembling accurate underlying data. Before you start, have on hand:

If you keep a current SDS library and a per-location inventory with quantities throughout the year, the February scramble largely disappears. See our guide on building a chemical inventory from scratch for a starting point.

How SDSentry helps

SDSentry tracks quantity and unit per item in your per-location inventory, flags items over a threshold you set, and exports an EPCRA Tier II CSV so your preparer is not rebuilding the inventory by hand each February. It keeps a current SDS on file for every product, which is where most of the hazard and storage details on the report come from. It will not submit the report for you — you still file through Tier2 Submit and the DEQ Online Filing System — but it turns the worst part, compiling and maintaining the data, into a download. Pair it with our HazCom compliance checklist so your OSHA and EPCRA obligations stay covered at the same time.

Track inventory for Tier II — free trial

Educational information only, not legal or compliance advice. Tier II thresholds, deadlines, submission methods, and any state fees change, and Oklahoma's specific process is set by the state. Verify your obligations with the Oklahoma DEQ, and with EPA's EPCRA resources at epa.gov/epcra, before you file — and consult a qualified professional for your situation.

Start with the chemical list
A HazCom program starts from a list of the hazardous chemicals at your site. Download the free chemical inventory list template as a CSV for Excel or Google Sheets, or as a printable PDF. Free, no signup.
Get the free chemical inventory template →

📋 Could you produce the sheet for every product on your shelf?
Paste the products you keep on site and get each manufacturer’s current safety data sheet laid out as one printable binder index — the thing an inspector asks to see. Free, no signup, nothing emailed to you.
Build my SDS binder — free →
Just one product? Free SDS search. Want to know where your site stands against 29 CFR 1910.1200? 2-minute HazCom self-audit. No signup for either.

Frequently asked questions

Who do I send my Tier II report to in Oklahoma?

Oklahoma facilities prepare the report in the latest version of EPA's Tier2 Submit and submit it electronically to the Department of Environmental Quality through the DEQ Online Filing System. DEQ then distributes reports to Local Emergency Planning Committees and fire departments.

When is the Tier II deadline in Oklahoma?

March 1 each year. DEQ states the Tier II report is due by March 1 of each year.

What are the Tier II reporting thresholds?

You report if a hazardous chemical that requires a safety data sheet is on site at or above 10,000 pounds at any time during the year, or at or above 500 pounds — or the Threshold Planning Quantity, whichever is lower — for an Extremely Hazardous Substance. Quantities are the maximum amount present at any one time.

Is there a Oklahoma state fee for Tier II?

Yes. Under OAC 252:20-1-7, oil and gas production facilities and agriculture chemical dealerships pay $12 per reported facility, and other facilities pay $15 per hazardous substance and $30 per Extremely Hazardous Substance, up to $1,000 per company. Card payments add a 2.25% merchant fee and a $2 portal fee; ACH adds a $1 portal fee.