Guides / HazCom in Indiana

Hazard Communication in Indiana: IOSHA and the 2024 HazCom Update

⏰ Federal OSHA HazCom deadline — November 20, 2026: employers under federal OSHA must update their workplace labels, written HazCom program, and employee training to the new GHS format by then (State Plan states can set other dates; see below). Check your program free — 2-minute self-audit →
Updated October 2026

Short answer: Adopted, Indiana effective date November 16, 2024 (corrections April 9, 2025). Hazard communication in Indiana is enforced by IOSHA under Indiana’s State Plan, and State Plans adopt federal OSHA’s 2024 update on their own timelines. Status, rule citation and dates checked October 10, 2026 against official sources linked below; not legal advice.

Free, no signup: the SDS binder builder at sdsentry.0xpi.com/sds-binder.html turns a pasted list of the products you keep on site into one printable index of their current safety data sheets.

Could you produce the sheet for every product on your shelf? Paste your product list and get each manufacturer’s current safety data sheet as one printable binder index — free, no signup. Build my SDS binder — free →

Who enforces HazCom in Indiana

Indiana runs its own OSHA-approved State Plan. Workplace hazard communication is enforced by Indiana OSHA (IOSHA), part of the Indiana Department of Labor.

The Indiana State Plan “applies to all private sector workplaces in the state”, except areas federal OSHA keeps, including maritime employment, contractors in U.S. Postal Service mail operations, and aircraft cabin crew on aircraft in operation. It also covers state and local government employers, but not federal government employers (osha.gov/stateplans/in).

The Indiana HazCom rule

29 CFR 1910.1200, adopted and incorporated by reference by the Indiana Occupational Safety Standards Commission (IOSSC) through Adoption by Reference bulletins.

Is the 2024 HazCom update in effect in Indiana?

Adopted. IOSSC Adoption by Reference Bulletin #24-01 adopts the May 20, 2024 Hazard Communication Standard with an Indiana effective date of November 16, 2024. Bulletin #24-02 adopts OSHA’s October 9, 2024 corrections with an Indiana effective date of April 9, 2025.
“The Indiana Department of Labor adopts and incorporates by reference the OSHA standards in 29 CFR Part 1910 Hazard Communication Standard, published originally in the Federal Register, May 20, 2024 … Federal effective date: July 19, 2024. Indiana effective date: November 16, 2024.” — IOSSC Bulletin #24-01
“Federal effective date: October 9, 2024. Indiana effective date: April 9, 2025.” — IOSSC Bulletin #24-02

The 2026 federal date extension: we could not confirm from an official Indiana source on October 10, 2026 whether IOSHA has also adopted federal OSHA’s January 15, 2026 four-month extension of the compliance dates (91 FR 1695). The 2024 rule as first published set July 20, 2026 for employers to update labels, the written program and training for substances, and January 19, 2028 for mixtures; with the extension, the federal dates are November 20, 2026 and May 19, 2028. Ask IOSHA which date it enforces (contact IOSHA). The cautious course is to treat the earlier date as already here.

Indiana-specific differences

osha.gov notes that IOSHA “adopts all OSHA standards and regulations except it has a unique excavations standard”; we found no Indiana-specific HazCom requirement beyond the federal text.

The federal dates, for context

Federal OSHA’s updated standard was published May 20, 2024 (89 FR 44144) and took effect July 19, 2024. The compliance dates in 29 CFR 1910.1200(j) (eCFR, checked October 10, 2026) are:

WhoWhatFederal date
Chemical manufacturers, importers and distributorsSubstances: comply with all modified provisions ((j)(2)(i))May 19, 2026
All employersSubstances: as necessary, update alternative workplace labeling under (f)(6), the hazard communication program, and training for newly identified hazards ((j)(2)(ii))November 20, 2026
Chemical manufacturers, importers and distributorsMixtures: comply with all modified provisions ((j)(3)(i))November 19, 2027
All employersMixtures: the same employer updates ((j)(3)(ii))May 19, 2028

Between May 20, 2024 and those dates, anyone covered may comply with the revised standard, the version in effect as of July 1, 2023, or both ((j)(4)). These dates already include the four-month extension OSHA published on January 15, 2026 (91 FR 1695); the 2024 rule as first published said January 19, 2026, July 20, 2026, July 19, 2027 and January 19, 2028. A State Plan that adopted the 2024 rule but not the extension, or that set its own dates, can have different deadlines, which is why the state section above matters.

What to do now (true in every state)

Every State Plan’s HazCom rule must be at least as effective as the federal one, so these basics apply whichever version your state enforces today:

SDSentry keeps your library of supplier SDSs current and reachable from any phone, so swapping in revised sheets during the 2024 update is quick. SDSentry manages the SDSs your suppliers publish; it does not write them.

Tier II is a different law

EPCRA Tier II chemical inventory reporting comes from a separate federal law (the Emergency Planning and Community Right-to-Know Act, an EPA program) and is filed with state and local agencies, not with IOSHA. See Tier II reporting in Indiana.

Other State Plan states

See the 2024 HazCom update status in all State Plan states we cover.

Sources (checked October 10, 2026)

Questions about how IOSHA applies a rule to your workplace: contact IOSHA.

Educational information only, not legal or compliance advice. Requirements can vary by product, use and jurisdiction — verify at osha.gov/hazcom and 29 CFR 1910.1200, or consult a qualified professional.

Start with the chemical list
A HazCom program starts from a list of the hazardous chemicals at your site. Download the free chemical inventory list template as a CSV for Excel or Google Sheets, or as a printable PDF. Free, no signup.
Get the free chemical inventory template →

📋 Could you produce the sheet for every product on your shelf?
Paste the products you keep on site and get each manufacturer’s current safety data sheet laid out as one printable binder index — the thing an inspector asks to see. Free, no signup, nothing emailed to you.
Build my SDS binder — free →
Just one product? Free SDS search. Want to know where your site stands against 29 CFR 1910.1200? 2-minute HazCom self-audit. No signup for either.

Frequently asked questions

Has Indiana adopted the 2024 HazCom update?

Yes. IOSSC Bulletin #24-01 adopted the May 20, 2024 Hazard Communication Standard with an Indiana effective date of November 16, 2024; Bulletin #24-02 adopted the October 9, 2024 corrections effective April 9, 2025 in Indiana.

What is the HazCom deadline for Indiana employers?

We could not confirm whether Indiana adopted federal OSHA's January 15, 2026 date extension. The rule as first published set July 20, 2026 for employers (substances); the extended federal date is November 20, 2026. Ask IOSHA which it enforces.

Who enforces HazCom in Indiana?

Indiana OSHA (IOSHA), part of the Indiana Department of Labor, for private-sector and state and local government workplaces. Federal OSHA keeps some areas, such as maritime employment.


Most SDS software stops at the safety data sheets. OSHA HazCom asks an employer for five things: a written program, a chemical list, container labels, SDS access and employee training. SDSentry covers all five in one product and builds the written program from your own chemical list. See how 11 SDS tools compare on all five →

SDSentry keeps your SDS library, GHS labels and HazCom training records in one place — OSHA deadline price: $24 per location a month, or $199 a year (regularly $49). Start by November 20, 2026 to lock it in.

Unlimited users and no SDS cap. On an annual plan that is less than any paid SDS tool we compared.

Start 7-day free trial Compare SDS software prices →