Bondo Body Filler SDS: What the 3M Bondo Original Filler Safety Data Sheets Say
📄 Get the SDS: 3M Bondo Original Filler kit SDS (24-2445-5, Nov 2025)
Short answer: 3M’s SDS for the Bondo Original Filler kit (issued 11/17/25) covers two components. The filler (talc 15–30%, styrene monomer under 20%) is a Flammable Liquid Category 3, Carcinogenicity Category 2 and STOT single and repeated exposure Category 1, signal word Danger. The Bondo Cream Hardener 0913 (Blue) is 30–60% benzoyl peroxide: Organic Peroxide Type E, skin sensitizer, Danger, and must be stored below 32 °C (90 °F).
Free, no signup: the SDS binder builder at sdsentry.0xpi.com/sds-binder.html turns a pasted list of the products you keep on site into one printable index of their current safety data sheets.
What the Bondo SDSs cover
3M issues the kit as a cover sheet plus one SDS per component. We read all three, checked October 10, 2026:
- 3M Bondo Original Filler OR, PT, QT, GAL, ES, WM, EF (component SDS 44-4359-4, 07/27/23): Flammable Liquid 3; Serious Eye Damage/Irritation 2B; Carcinogenicity 2 ("Suspected of causing cancer"); STOT single exposure 1 (liver, sensory organs); STOT repeated exposure 1 (respiratory system, sensory organs), plus "May cause damage to organs through prolonged or repeated exposure" for the liver. Danger; 3M lists the flame and health hazard symbols. Talc 15–30%, styrene monomer under 20%, titanium dioxide under 1%. Flash point 80–82 °F, closed cup.
- Bondo Cream Hardener 0913 (Blue) (component SDS 44-4097-0, 05/01/23): Organic Peroxide Type E ("Heating may cause a fire"); Eye Irritation 2A; Skin Sensitizer 1B; STOT single exposure 1 (cardiovascular, nervous system, kidney/urinary tract, respiratory system). Danger; 3M lists the flame, exclamation mark and health hazard symbols. Benzoyl peroxide 30–60%, ethylene glycol up to 7.5%. Incompatible with accelerators.
- Exposure limits (Section 8): styrene, OSHA PEL 100 ppm TWA with a 200 ppm ceiling, ACGIH 10 ppm TWA and 20 ppm STEL (with an ototoxicant note); benzoyl peroxide, OSHA 5 mg/m³; talc and titanium dioxide limits also apply to sanding dust.
3M’s Bondo line has separate sheets for Bondo-Glass, metal-reinforced and lightweight fillers. Two products with similar names can have different formulas and different classifications, so keep the sheet for the exact product number on your shelf.
PPE and handling the sheets call for
- Eyes: safety glasses with side shields, or indirect vented goggles.
- Hands: filler: fluoroelastomer, polyvinyl alcohol (PVA) or polymer laminate gloves; hardener: polymer laminate (nitrile may be worn over laminate for dexterity).
- Air: general dilution or local exhaust ventilation; explosion-proof ventilation for the filler. If an exposure assessment shows a respirator is needed, 3M lists a half or full facepiece air-purifying respirator for organic vapors and particulates, "as part of a full respiratory protection program" (29 CFR 1910.134).
- Ignition: ground and bond containers, use non-sparking tools, keep away from heat and flames; keep the hardener away from clothing and other combustibles.
First aid (Section 4)
- Skin: take off contaminated clothing and rinse with water; for the hardener, get medical advice if a rash occurs (it is a sensitizer).
- Eyes: rinse cautiously with water for several minutes; remove contact lenses if easy.
- Exposed or concerned: get medical advice. 3M’s note to physicians on the hardener covers ethylene glycol poisoning. In the United States, Poison Control is 1-800-222-1222.
Storage
Filler: well-ventilated, cool, tightly closed, away from heat, acids, strong bases and oxidizers. Hardener: protect from sunlight, do not exceed 32 °C (90 °F), keep only in the original container and away from other materials and combustibles. A hot body-shop loft in summer can exceed that; see chemical storage compatibility.
Where to get the current Bondo SDS
- The sheet we read: 3M Bondo Original Filler kit SDS (24-2445-5, Nov 2025), checked October 10, 2026. 3M publishes its US SDSs at www.3M.com.
- Your supplier must provide the SDS with the first shipment (29 CFR 1910.1200(g)(6)–(7)), and the manufacturers below publish theirs free online. Or search for a Bondo SDS with our free SDS search.
Where it fits in an auto shop HazCom program
Body filler and its hardener, as two separate products, belongs on your shop’s chemical inventory, and its SDS belongs where a technician can reach it from the bay or the booth during every shift (29 CFR 1910.1200(g)(8)). Train techs on it before they use it, and again when a new hazard comes in, such as a new supplier or formula (1910.1200(h)(1)). If you decant it into a spray bottle, pump can or parts-washer tank, label that container: the free GHS label maker prints secondary-container labels from the hazard classes above. See the auto body shop HazCom checklist and what auto repair shops get cited for.
Frequently asked questions
Is Bondo body filler hazardous?
Yes. 3M's SDS for Bondo Original Filler classifies the filler as a Flammable Liquid Category 3, Carcinogenicity Category 2 and STOT single and repeated exposure Category 1, signal word Danger. It contains talc and styrene monomer.
What is in Bondo cream hardener?
3M's SDS for Bondo Cream Hardener 0913 (Blue) lists benzoyl peroxide (30-60%) and ethylene glycol (up to 7.5%). It is classified as an Organic Peroxide Type E and a skin sensitizer, signal word Danger.
How should Bondo hardener be stored?
The SDS says to protect it from sunlight, store it at or below 32 C (90 F), keep it only in the original container and away from other materials, clothing and combustibles, and store it locked up.
What respirator does the Bondo SDS recommend?
If an exposure assessment shows one is needed, 3M lists a half or full facepiece air-purifying respirator for organic vapors and particulates, used as part of a full respiratory protection program.
Most SDS software stops at the safety data sheets. OSHA HazCom asks an employer for five things: a written program, a chemical list, container labels, SDS access and employee training. SDSentry covers all five in one product and builds the written program from your own chemical list. See how 11 SDS tools compare on all five →
SDSentry keeps your SDS library, GHS labels and HazCom training records in one place — $24 per location a month, or $199 a year, with unlimited users.
Unlimited users and no SDS cap. On an annual plan that is less than any paid SDS tool we compared.
Start 7-day free trial Compare SDS software prices →