Methyl Methacrylate SDS: What the Acrylic Monomer Sheet Says
📄 Get the SDS: Fisher Scientific methyl methacrylate SDS (PDF)
Short answer: methyl methacrylate (MMA, CAS 80-62-6), the liquid monomer in self-cure and heat-cure denture and tray acrylics, is a Flammable Liquid Category 2 (flash point 8 °C / 46.4 °F) and a Skin Sensitizer Category 1, and irritates skin, eyes and the respiratory tract; signal word Danger. Dental acrylic liquids are mostly MMA but each brand has its own SDS.
Free, no signup: the SDS binder builder at sdsentry.0xpi.com/sds-binder.html turns a pasted list of the products you keep on site into one printable index of their current safety data sheets.
What the MMA SDS covers
We read Fisher Scientific’s sheet for methyl methacrylate, stabilized (catalog AC12714, revision 8, 18 December 2025), checked October 10, 2026:
- Classification (Section 2): Flammable liquids Category 2; Skin Irritation 2; Eye Irritation 2; Skin Sensitization 1; STOT single exposure 3 (respiratory system).
- Hazard statements: "Highly flammable liquid and vapor", "Causes skin irritation", "Causes serious eye irritation", "May cause an allergic skin reaction", "May cause respiratory irritation".
- Pictograms: flame and exclamation mark.
- Exposure limits (Section 8): ACGIH TLV 50 ppm TWA; (vacated) OSHA 100 ppm TWA; NIOSH IDLH 1000 ppm.
- Storage and reactivity (Sections 7 and 10): keep cool and tightly closed in a flammables area away from heat, sparks and flame; inhibitor levels must be maintained; incompatible with acids, bases, amines, halogens, peroxides and reducing agents.
PPE the sheet calls for
- Chemical safety goggles or protective eyeglasses (29 CFR 1910.133).
- Protective gloves and clothing to prevent skin exposure. MMA is a sensitizer: once a technician is sensitized, small exposures can trigger dermatitis, so glove choice and no-touch mixing technique matter.
- Use only in a well-ventilated area; ground and bond containers, use non-sparking tools, and no smoking or open flames (lab torches and burners included).
First aid (Section 4)
- Eyes: rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes; get medical attention.
- Skin: wash off immediately with soap and plenty of water while removing contaminated clothing; get medical advice if irritation or a rash occurs.
- Inhaled: remove to fresh air; get medical attention. Swallowed: do not induce vomiting. In the United States, Poison Control is 1-800-222-1222.
Where to get the current SDS for your acrylic liquid
Self-cure and heat-cure acrylic liquids, tray materials and some temporary crown materials are mostly MMA but may contain other monomers, cross-linkers and inhibitors. Keep the manufacturer’s sheet for each liquid on your lab shelf; the Fisher sheet shows what to expect.
- Reference sheet: Fisher Scientific methyl methacrylate SDS (PDF), checked October 10, 2026.
- Your supplier must provide the SDS with the first shipment (29 CFR 1910.1200(g)(6)–(7)); dental distributors usually also post it on the product page. Or search for a methyl methacrylate SDS with our free SDS search, adding the brand.
Where it fits in a dental office HazCom program
Acrylic monomer belongs in your practice’s SDS binder or digital SDS library, on your chemical inventory, and in the HazCom training you give every assistant, hygienist and front-desk hire before they handle it. If you decant it, label the new container: the free GHS label maker prints secondary-container labels from the hazard classes above. See OSHA requirements for dental offices, the dental office SDS binder list and the printable dental HazCom checklist.
Frequently asked questions
Is methyl methacrylate flammable?
Yes. Fisher Scientific's SDS classifies MMA as a Flammable Liquid Category 2 with a flash point of 8 °C (46.4 °F), signal word Danger.
Is MMA a skin sensitizer?
Yes. The SDS classifies it as Skin Sensitization Category 1: it may cause an allergic skin reaction, which is why gloves and no-touch handling matter in dental labs.
What is the exposure limit for methyl methacrylate?
The SDS lists an ACGIH TLV of 50 ppm TWA, a vacated OSHA limit of 100 ppm TWA and a NIOSH IDLH of 1000 ppm.
Do dental acrylic liquids have their own SDS?
Yes. Each brand of self-cure or heat-cure acrylic liquid has its own SDS; keep the manufacturer's sheet for each one you use.
Most SDS software stops at the safety data sheets. OSHA HazCom asks an employer for five things: a written program, a chemical list, container labels, SDS access and employee training. SDSentry covers all five in one product and builds the written program from your own chemical list. See how 11 SDS tools compare on all five →
SDSentry keeps your SDS library, GHS labels and HazCom training records in one place — $24 per location a month, or $199 a year, with unlimited users.
Unlimited users and no SDS cap. On an annual plan that is less than any paid SDS tool we compared.
Start 7-day free trial Compare SDS software prices →